|Description:||Fast drying odourless polyurethane primer, solvent and water free|
|Finish:||Unfinished / Natural Oiled / Colour Matched|
|Mixture Ratio:||Single component (Ready to use)|
|Application:||Roller / Brush|
|Hardening:||45 - 50 minutes|
|Delivery||1 - 2 Days|
Also available in 6kg
Primerfast is a single component polyurethane primer which is solvent and water free.
It is used to prevent rising damp in absorbent sub-floors (2-3 coats) and to consolidate friable sub-floors (1 coat).
It is suitable for use on either absorbent and non-absorbent subfloors, including anhydrite.
HOW TO USE:
Clean the foundation to be treated and eliminate any trace of oil, grease, wax or paint spots. The subfloor must be free from cracks. Apply one coat of Primerfast with a 6/8mm roller or a 3x13cm or 4x14cm flat brush (120-150g/m²) in a uniform way to create a thin film ensuring that pooling does not occur. After 45 minutes apply a second coat of Primerfast, following the same procedure. MS Flex Adhesive must be applied within 24 hours